DAT Recorder | DAT Photos | DAT User Manual | DAT Service Manual

The Tascam DA-30 provides all the connectivity imaginable in a professional application on both analog and digital environments.

SCMS code can be overridden.

Enhanced transport controls.

• Digital audio interface conforming to AES/EBU standards.
• 3 sampling rates supported: 32 kHz, 44.1 kHz, and 48 kHz.
• Balanced +4 dBm analog inputs/outputs for professional connections
• Individual A/D and D/A converters for the L and R channels using the latest converter technology (64x oversampling Delta-Sigma A/D, 8x oversampling 18 bit D/A)
• Mountable in a 19" EIA rack
• Wired-remote controls
• I/O port (parallel, as distinct from serial) for the DA-30 to be controlled from edit controllers or other external units
• MARGIN display digitally shows in dB the available headroom before distortion occurs
• Standby mode for automatic PAUSEs at Start IDs
• Variety of Start and Skip ID editing capabilities (positioning within 5 frames, automatic ID recording, program renumbering and others)
• Digital copy from digital sources ("Copy Prohibited" or not) possible (but third generation copying of that copy prohibited)

Tape Speed:	8.5 mm/sec, (12.225 mm/sec.)
Quantization Bit:	16-bit linear (SP); 12 bit nonlinear (LP)
Sampling Rate:	Recording: 48 kHz/44.1 (digital, analog input); 32 kHz (digital input only)
Frequency Response:	20 Hz - 20 kHz +/- .5dB 9SP) 20 HZ - 14.5 kHz +/- .5dB (LP)
Signal to Noise Ratio:	Better than 92 db
Dynamic Range:	Better than 93 db
Total Harmonic Distortion:	0.004% at 1 kHz (SP) .07% at 1 kHz (LP)
Channel Separation:	Better than 85 db (at 1 kHz)
Wow and Flutter:	Unmeasurable (less than 0.001%)
Analog Input:	(XLR) balanced, +4 dBm / 10k ohm (RCA) unbalanced, -10 dB V /50k ohm
Analog Output:	(XLR) balanced, +4 dBm/10k ohm, (RCA) unbalanced, -10 dBV (+6 dBV max)     / 430 ohm; Output Level: 100mW or more (8-ohm load)
Headphone Output:	1/4" phone jack (x1), 100 mW + 100 mW (8 ohm)
Digital I/O:	(XLR) AES/EBU (RCA) Coaxial (S/PDIF); Parallel Control I/O Port: D-sub     15-pin (female)

Tape Speed:	8.5 mm/sec, (12.225 mm/sec.)
Quantization Bit:	16-bit linear (SP); 12 bit nonlinear (LP)
Sampling Rate:	Recording: 48 kHz/44.1 (digital, analog input); 32 kHz (digital input only)
Frequency Response:	20 Hz - 20 kHz +/- .5dB 9SP) 20 HZ - 14.5 kHz +/- .5dB (LP)
Signal to Noise Ratio:	Better than 92 db
Dynamic Range:	Better than 93 db
Total Harmonic Distortion:	0.004% at 1 kHz (SP) .07% at 1 kHz (LP)
Channel Separation:	Better than 85 db (at 1 kHz)
Wow and Flutter:	Unmeasurable (less than 0.001%)
Analog Input:	(XLR) balanced, +4 dBm / 10k ohm (RCA) unbalanced, -10 dB V /50k ohm
Analog Output:	(XLR) balanced, +4 dBm/10k ohm, (RCA) unbalanced, -10 dBV (+6 dBV max)     / 430 ohm; Output Level: 100mW or more (8-ohm load)
Headphone Output:	1/4" phone jack (x1), 100 mW + 100 mW (8 ohm)
Digital I/O:	(XLR) AES/EBU (RCA) Coaxial (S/PDIF); Parallel Control I/O Port: D-sub     15-pin (female)

Notice: Undefined variable: UM_JP in D:\inetpub\vhosts\datrecorders.co.uk\httpdocs\files\manuals.php on line 114

Tascam DA-30 User Manual
Number of Pages	24
File Size	1.7 MB
Instant Download	Yes

Code	Language	Price	Purchase
UMDA30_EN	English Operating Instructions	4.99 GBP
Paypal Verified

Tascam DA-30 Service Manual
Number of Pages	72
File Size	18.2 MB
Instant Download	Yes

Code	Language	Price	Purchase
SMDA30_EN	English	12.99 GBP
Paypal Verified